Ever wondered why your credit card always fits perfectly in your wallet or at the gas pump? That’s because almost all credit cards follow a universal size standard: ISO/IEC 7810 ID1.
Here’s a quick cheat sheet:
| Measurement | Millimeters (mm) | Inches |
| Width | 85.60 | 3.37008 |
| Height | 53.98 | 2.12598 |
| Thickness | 0.76 (nominal) | 0.030 |
> Tip: Those numbers are super precise, but realworld cards might be off by a tiny bit usually about ±0.1 mm for width/height and ±0.04 mm for thickness.
Why This Size? (A Quick Dive Into the Standard)
ISO/IEC 7810 ID1 is the official name for the standard credit card size.
This size isn’t just for credit cards it’s also used for most driver’s licenses, ID cards, and even some transit cards.
Sticking to this size means cards work everywhere: wallets, ATMs, chip readers, and vending machines.
Breaking Down the Dimensions
In Millimeters:
Width: 85.60 mm
Height: 53.98 mm
Thickness: 0.76 mm (most of the time)
In Inches (if you like imperial):
Width: 3.37008 inches
Height: 2.12598 inches
Thickness: 0.030 inch
> Handy Conversion: 1 mm = 0.0393701 inches. Just multiply if you want to check for yourself!
If you’re curious to learn more details, check out this helpful guide on what are credit card dimensions.
About Thickness and Tolerances
You might think, “Does a fraction of a millimeter really matter?” For machines and card readers yes, it does!
Typical Tolerances
Width/Height: ±0.1 mm
Thickness: ±0.04 mm
Fitment Margin: 0.76 mm ±0.08 mm (so it slides in just right)
These tolerances make sure your card isn’t too snug (which could jam readers) or too loose (which might cause read errors).
What About the Corners?
Ever noticed your card’s corners are rounded, not sharp? That’s on purpose!
Edge/Corner Radius: Usually about 3.18 mm (0.125 inch)
Why Care?: Rounded corners make cards more comfortable to hold and protect them (and your wallet) from wear and tear.
Variation: Tiny differences exist between brands or regions, but all stay pretty close to the standard.
Do All Regions and Brands Use the Same Size?
For the most part yes. But here’s the scoop:
Some regions or card issuers might have slight tweaks (maybe a hair thicker, or a slightly different corner curve).
These changes are tiny, so any card you get will fit most readers and wallets globally.
Important Design & Practical Tips
If you’re designing or evaluating cards, keep these pointers in mind:
Stick to the standard: Deviate too much, and your cards might not work everywhere.
Document tolerances: Make sure everyone in the supply chain knows the exact numbers.
Check edge radius: It matters for both looks and smooth insertion.
Test with real readers/wallets: Don’t just rely on specs try it out!
Consider durability: Cards should handle daily swiping, bending, and the occasional trip through the laundry.
Quick FAQ
Q: Will my card fit in a foreign ATM or wallet?
A: Almost always! Unless it’s a really old or oddball card, the size is universal.
Q: Why do some cards feel thicker or thinner?
A: Minor manufacturing differences, but the standard keeps them close.
Q: Can cards have different shapes?
A: Not if you want them to work everywhere stick to the rectangle with rounded corners!
TL;DR (Too Long; Didn’t Read)
Standard credit card size: 85.60 mm x 53.98 mm x 0.76 mm (or 3.37008 in x 2.12598 in x 0.030 in).
Tiny tolerances, but stick close to the standard for universal compatibility.
Rounded corners = comfort + durability.
Most cards worldwide use this size, so you don’t have to worry about fit.
If you need exact specs for a project, just copy the numbers above they’re the industry gold standard!